@scottalanmiller said in Starting to work on an initial FreePBX setup script:

Corrected the title to FreePBX instead of FeePBX, lol. Although that name would be useful somewhere, too.

go me

This is the SSL score.
76a95c9d-98c9-4017-b1a5-9241f011403e-image.png

I assume this is why the A rating and not A+
c8606068-aa33-4e47-ac08-12495d504b90-image.png

But not much to do about that since it is Cloudflare that is terminating.

@Dashrender said in What is the best workflow to setup VitalPBX:

@JaredBusch said in What is the best workflow to setup VitalPBX:

@bnrstnr said in What is the best workflow to setup VitalPBX:

@rcuadra popped back in yesterday... Maybe he could help?

Well, that was honestly why I replied here again. Also @scottalanmiller is back in the states and may have valid input as I know that he has deployed this.

Or at least set it up on the PBX side, no telling on the phone and SIP/telco access side.

Why would the phone side be any more or less difficult?

I'm marking this solved as I create a direction from / called scripts and that does what I need.

No real need for a public shareable desktop when this works just fine.

@DustinB3403 said in Fedora Salt Master - New installation:

@scottalanmiller said in Fedora Salt Master - New installation:

@DustinB3403 said in Fedora Salt Master - New installation:

And really, all I'm looking for is a convenient way setup my user workstations, and update them without the Apple overhead, including with brew commands.

This is my ML How Tos are better 🙂

I looked but didn't find one that was current.

Yeah, not sure that there is one. On Fedora 28 it was broken. On Fedora 30 I think it is just "dnf install salt-master -y" and you are done. So nothing to write up.

I think we are running Salt on Ubuntu now because of the breakage issues on Fedora.

@Obsolesce said in Generating a list of Software to Reinstall on Windows 10:

@dbeato said in Generating a list of Software to Reinstall on Windows 10:

@Obsolesce said in Generating a list of Software to Reinstall on Windows 10:

@scottalanmiller said in Generating a list of Software to Reinstall on Windows 10:

@Obsolesce said in Generating a list of Software to Reinstall on Windows 10:

@scottalanmiller said in Generating a list of Software to Reinstall on Windows 10:

@Dashrender said in Generating a list of Software to Reinstall on Windows 10:

@gjacobse said in Generating a list of Software to Reinstall on Windows 10:

@Obsolesce said in Generating a list of Software to Reinstall on Windows 10:

I usually just copy/paste a Chocolatey install command that does it all at once. Everything else is on separate media that requires no install. Example, copy over games, import them in... such as into Steam.

I was going to mention... with Chocolatey tool choco list -lo just pipe it to a text file.

But that only gives you things installed through Chocolatey. Dustin's OP gives you everything installed through the normal Windows installer process (and registers the install).

I recall when chocolatey didn't use the windows installer process for everything - things are much better now.

It is package by package. Lots of things, through Chocolatey or not, don't use the Windows installer process.

I've not seen Chocolatey not register software installs in Windows, ever.

I have. Many times. Most of the time I think that it does, but it is not Chocolatey that does it when it does.

With what software specifically?

Try installing Sysinternal tools, it will not register at all, that is one example. You can do so with Chocolatey.

I never installed that stuff anyways. That Chocolatey doesn't is nothing new.

I thought you wanted to know which applications would do that, but I guess I read wrong.

Now I'm getting Unexpected end of File

FML. . . what changed!

I got it from here

brew install macosvpn

sudo macosvpn create --l2tp Atlantic --endpoint atlantic.example.com --username ' ' --password ' ' --shared-secret s3same

You can provide ' ' for both the username and password, this allows any user to fill in as required.

@black3dynamite I was digging into it and it appears to be an issue with the host more than brew.

@scottalanmiller said in First Time Server Buy . . . Build. . .:

@wrcombs said in First Time Server Buy . . . Build. . .:

@scottalanmiller said in First Time Server Buy . . . Build. . .:

@wrcombs said in First Time Server Buy . . . Build. . .:

@tonyknobel said in First Time Server Buy . . . Build. . .:

@wrcombs Physical space -- how big do you want it?

Small enough to fit on my desk

No real server is going to fit there

Well around as small as possible.

A real server is the size of a desk and sounds like a jet engine.

Sounds wonderful.. Glad I have a basement! lol

@dbeato said in Computer Recycling:

Update from ZorinOS
0_1521215472603_2018-03-16_1150_001.png

Very nice. I've already finished with these laptops though so likely won't revisit this.

@matteo-nunziati said in Help me understand KVM Networking:

@stacksofplates said in Help me understand KVM Networking:

@wirestyle22 said in Help me understand KVM Networking:

@black3dynamite said in Help me understand KVM Networking:

@stacksofplates said in Help me understand KVM Networking:

Too bad ovs isnt in the repos for RHEL/CentOS. You can set up these private networks and connect them through a VXLAN with ovs. That way you can have something like a separate dev network on the same hosts and they can communicate between hosts.

Not available in the epel repo?

That is apparently the case unless my google--fu isn't up to snuff

Nope. It is available in Fedora though. If you want to install it you have to manually build the RPMs. While not hard to build it would be a pain to maintain updates.

OVS is used by oVirt so maybe the centos ovirt repo has it (or the ovirt stable repo)

I'm assuming it's just building the RPM since it's not in the normal repo.

http://resources.ovirt.org/pub/ovirt-4.2/

@marcinozga said in Network setup for production KVM:

Containers or VM guests makes no difference here.

Rarely does.

@jaredbusch said in The Ultimate KVM setup:

@mattbagan said in The Ultimate KVM setup:

@tim_g said in The Ultimate KVM setup:

@mattbagan said in The Ultimate KVM setup:

@tim_g said in The Ultimate KVM setup:

@mattbagan said in The Ultimate KVM setup:

@tim_g said in The Ultimate KVM setup:

@mattbagan said in The Ultimate KVM setup:

I'm having a hard time following this. So we have one(two) KVM host, fedora instance running virt manger, another fedora running vnc server?

Install Cockpit: dnf install cockpit cockpit-machines
Then do a dnf group install "Virtualization".

Set each VM to use SPICE and VNC. You can get VM console access via Cockpit and the VNC display.

cockpit gets installed on the KVM host?

Yes.

Can I create VMs within cockpit? I do not see an option for that.

No, but you can connect to your KVM host via virt-manager from another Linux PC.

Or do a search for my Kimchi guide:

https://mangolassi.it/topic/14675/fedora-26-kvm-html5-remote-access-with-web-console-via-kimchi

Guide is here:
https://www.timothygruber.com/linux/fedora-26-kvm-html5-remote-access-with-web-console-via-kimchi-part-1/

I have tried connecting virt manger to my KVM host but I get all kinds of errors. Not sure if I am doing it right. Do you have a guide for connecting to a remote KVM host with virt manger for a non-root user? I get lots of accessed denied. I did end up finding your guide after searching cockpit on the forum.

You have to put your user in the virtual manager group. Forget the proper name of the group.

@stacksofplates knows it

libvirtd

@JaredBusch said in How to Install the Atera RMM Agent on Hyper-V Server 2012 R2:

DISM /online /enable-feature /featurename:NetFx3 /all

i do this all the time on Windows 10, except I include the /source:location of files since it's not on my WSUS system.

@Dashrender said in FreePBX setup with Digium Box G100:

@scottalanmiller said in FreePBX setup with Digium Box G100:

@Farhad-Farahmand said in FreePBX setup with Digium Box G100:

yeah i have connected PRI link to Digium Box G100 and wants to receive calls on freePBX extensions

So you want the G100 to just convert the PRI to SIP?

Is this what you want?

What if any work have you done so far?

That's the part I'm assuming he already has done.

@JaredBusch said:

@wirestyle22 said:

@JaredBusch said:

Controller is up and working well as a client. Easily joined the test network I setup on ZT's site.

Now to figure out how to create my own network.

Did you create a guide to how you achieved this? I've heard it's somewhat difficult. Also, is anyone testing the performance difference between self-hosted and hosted?

I have not setup the controller yet. I had other priorities form noon and beyond today.

It'll be interesting to see. I appreciate all of your effort

If the above is your problem, then you should look at a different solution. @scottalanmiller's current favorite is MeshCentral.

It is not as good as ConnectWise Control yet, IMO, but close.