Ubiquiti VOIP phone systems
-
@FATeknollogee said in Ubiquiti VOIP phone systems:
@DustinB3403 said in Ubiquiti VOIP phone systems:
So I'm getting some pricing together for a new phone system, and just realized that Ubiquiti also has their own line of phones and support for them with the controller.
Has anyone used one of these systems in their recent experience?
Pretty sharp looking phones with some impressive options.
If you decide not to "spin" up a vm & go the 3CX/FreePBX route, have you looked at the Grandstream lineup of UCM PBX and GXP phones?
I haven't, but I will now. Anyone able to comment on them?
-
@coliver said in Ubiquiti VOIP phone systems:
They are Android based IIRC. They look sharp and the pricing isn't bad. I think @scottalanmiller had gotten one to test with previously?
Yeah I think he did but didn't like them. Scott prefers Sangoma and Snom if I remember correctly.
-
@DustinB3403 said in Ubiquiti VOIP phone systems:
@FATeknollogee said in Ubiquiti VOIP phone systems:
@DustinB3403 said in Ubiquiti VOIP phone systems:
So I'm getting some pricing together for a new phone system, and just realized that Ubiquiti also has their own line of phones and support for them with the controller.
Has anyone used one of these systems in their recent experience?
Pretty sharp looking phones with some impressive options.
If you decide not to "spin" up a vm & go the 3CX/FreePBX route, have you looked at the Grandstream lineup of UCM PBX and GXP phones?
I haven't, but I will now. Anyone able to comment on them?
They work great!
The only problem, it's all built to take advantage of Grandstream only products with features like auto-discovery of the phones.You can also add Grandstream IP cameras, IP door stations, video conferencing etc.
-
@FATeknollogee Well that's a big suck.
-
@FATeknollogee said in Ubiquiti VOIP phone systems:
@DustinB3403 said in Ubiquiti VOIP phone systems:
@FATeknollogee said in Ubiquiti VOIP phone systems:
@DustinB3403 said in Ubiquiti VOIP phone systems:
So I'm getting some pricing together for a new phone system, and just realized that Ubiquiti also has their own line of phones and support for them with the controller.
Has anyone used one of these systems in their recent experience?
Pretty sharp looking phones with some impressive options.
If you decide not to "spin" up a vm & go the 3CX/FreePBX route, have you looked at the Grandstream lineup of UCM PBX and GXP phones?
I haven't, but I will now. Anyone able to comment on them?
They work great!
The only problem, it's all built to take advantage of Grandstream only products with features like auto-discovery of the phones.You can also add Grandstream IP cameras, IP door stations, video conferencing etc.
I have not tested a grandstream phone in 5 years. But they all sucked, across the board. Enough so, that I have not invested any more time in seeing if it has ever changed.
They work. Lots of people use them because they are the cheapest.
That is all I will say about grandstream phones.
-
@JaredBusch Thank you for the feedback.
-
@wirestyle22 said in Ubiquiti VOIP phone systems:
@coliver said in Ubiquiti VOIP phone systems:
They are Android based IIRC. They look sharp and the pricing isn't bad. I think @scottalanmiller had gotten one to test with previously?
Yeah I think he did but didn't like them. Scott prefers Sangoma and Snom if I remember correctly.
@scottalanmiller has never used a Sangoma phone. Neither have I.
They are on my list to get one purchased for comparisons.
They cost more than comparable Yealink models.
They look almost identical to Yealink.
-
Snom is a decent phone for price and quality, but they lack in features.
-
@JaredBusch said in Ubiquiti VOIP phone systems:
@wirestyle22 said in Ubiquiti VOIP phone systems:
@coliver said in Ubiquiti VOIP phone systems:
They are Android based IIRC. They look sharp and the pricing isn't bad. I think @scottalanmiller had gotten one to test with previously?
Yeah I think he did but didn't like them. Scott prefers Sangoma and Snom if I remember correctly.
@scottalanmiller has never used a Sangoma phone. Neither have I.
They are on my list to get one purchased for comparisons.
They cost more than comparable Yealink models.
They look almost identical to Yealink.
Yealink is definitely another. I think I remember Scott saying buying Sangoma phones supports FreePBX, maybe not even related to the quality of the phone.
-
@JaredBusch said in Ubiquiti VOIP phone systems:
@FATeknollogee said in Ubiquiti VOIP phone systems:
@DustinB3403 said in Ubiquiti VOIP phone systems:
@FATeknollogee said in Ubiquiti VOIP phone systems:
@DustinB3403 said in Ubiquiti VOIP phone systems:
So I'm getting some pricing together for a new phone system, and just realized that Ubiquiti also has their own line of phones and support for them with the controller.
Has anyone used one of these systems in their recent experience?
Pretty sharp looking phones with some impressive options.
If you decide not to "spin" up a vm & go the 3CX/FreePBX route, have you looked at the Grandstream lineup of UCM PBX and GXP phones?
I haven't, but I will now. Anyone able to comment on them?
They work great!
The only problem, it's all built to take advantage of Grandstream only products with features like auto-discovery of the phones.You can also add Grandstream IP cameras, IP door stations, video conferencing etc.
I have not tested a grandstream phone in 5 years. But they all sucked, across the board. Enough so, that I have not invested any more time in seeing if it has ever changed.
They work. Lots of people use them because they are the cheapest.
That is all I will say about grandstream phones.
Totally disagree, 5 years ago, yes they sucked. Today, completely different product.
They aren't the cheapest phones.
I use them & they work. -
@wirestyle22 said in Ubiquiti VOIP phone systems:
@JaredBusch said in Ubiquiti VOIP phone systems:
@wirestyle22 said in Ubiquiti VOIP phone systems:
@coliver said in Ubiquiti VOIP phone systems:
They are Android based IIRC. They look sharp and the pricing isn't bad. I think @scottalanmiller had gotten one to test with previously?
Yeah I think he did but didn't like them. Scott prefers Sangoma and Snom if I remember correctly.
@scottalanmiller has never used a Sangoma phone. Neither have I.
They are on my list to get one purchased for comparisons.
They cost more than comparable Yealink models.
They look almost identical to Yealink.
Yealink is definitely another. I think I remember Scott saying buying Sangoma phones supports FreePBX, maybe not even related to the quality of the phone.
FreePBX is Asterisk. Anything that runs on SIP can, for the most part, connect to an Asterisk phone server.
-
Yealink hits the awesome sauce point of great price and quality like Snom, but also have more features and flexibility.
-
@FATeknollogee said in Ubiquiti VOIP phone systems:
@JaredBusch said in Ubiquiti VOIP phone systems:
@FATeknollogee said in Ubiquiti VOIP phone systems:
@DustinB3403 said in Ubiquiti VOIP phone systems:
@FATeknollogee said in Ubiquiti VOIP phone systems:
@DustinB3403 said in Ubiquiti VOIP phone systems:
So I'm getting some pricing together for a new phone system, and just realized that Ubiquiti also has their own line of phones and support for them with the controller.
Has anyone used one of these systems in their recent experience?
Pretty sharp looking phones with some impressive options.
If you decide not to "spin" up a vm & go the 3CX/FreePBX route, have you looked at the Grandstream lineup of UCM PBX and GXP phones?
I haven't, but I will now. Anyone able to comment on them?
They work great!
The only problem, it's all built to take advantage of Grandstream only products with features like auto-discovery of the phones.You can also add Grandstream IP cameras, IP door stations, video conferencing etc.
I have not tested a grandstream phone in 5 years. But they all sucked, across the board. Enough so, that I have not invested any more time in seeing if it has ever changed.
They work. Lots of people use them because they are the cheapest.
That is all I will say about grandstream phones.
Totally disagree, 5 years ago, yes they sucked. Today, completely different product.
They aren't the cheapest phones.
I use them & they work.But 5 years ago Yealink was good, and has only gotten better.
Also 5 years ago Snom was good and has stayed about the same.For what should I look at Grandstream when they sucked so bad.
-
Polycom phones are good quality and features but higher cost.
The Sangoma phones match this line pretty close with cost, features, and quality (from spec sheets as I have not used one yet).
-
@DustinB3403
The Ubiquiti phones are a gimmick. I would never seriously consider it. They are also extremely expensive comparatively. -
@JaredBusch said in Ubiquiti VOIP phone systems:
But 5 years ago Yealink was good, and has only gotten better.
Also 5 years ago Snom was good and has stayed about the same.For what should I look at Grandstream when they sucked so bad.
I can say that about a lot of things...
Remember v1 of Hyper-V (with the Windows 2008/Vista code base).... -
@JaredBusch said in Ubiquiti VOIP phone systems:
@DustinB3403
The Ubiquiti phones are a gimmick. I would never seriously consider it. They are also extremely expensive comparatively.Yeah, this was my issue - they were easily 2x+ the cost of Yealink phones.
-
@FATeknollogee said in Ubiquiti VOIP phone systems:
@JaredBusch said in Ubiquiti VOIP phone systems:
But 5 years ago Yealink was good, and has only gotten better.
Also 5 years ago Snom was good and has stayed about the same.For what should I look at Grandstream when they sucked so bad.
I can say that about a lot of things...
Remember v1 of Hyper-V (with the Windows 2008/Vista code base)....Yes, that is why I specifically asked "For what should I look?"
Give me a real solid reason and I will.
This is what happened with Hyper-V. When Server 2012 was released with the new Hyper-V stack, I immediately was like cool, but f*** that s*. Not doing until someone shows me better evidence or I get the spare time to trial it.
It was not until Server 2012 R2 that I actually start deploying it, But that was simply because it took me that long to read enough trusted information and then test it myself.
-
@DustinB3403 Sure thing.
-
@JaredBusch said in Ubiquiti VOIP phone systems:
It was not until Server 2012 R2 that I actually start deploying it, But that was simply because it took me that long to read enough trusted information and then test it myself.
What did you move from out of curiousity?
