Fluke Networks
-
Welcome to those from Fluke. Thanks for spending a few hours with us.
-
@DustinB3403 said:
For a SMB (180 Employees) not heavily focused on troubleshooting our network (mostly because it's a one off issue) what tools would you recommend?
I looked over their stuff at SpiceWorld and asked them to host the St Louis SpiceCorp last fall. The LinkSprinter is awesome for the simple tasks like that.
-
Like Dustin, I'm in a fairly small office of 90 users. Cable issues are a pretty rare thing. What device do you see customers like us acquiring?
-
Welcome @KendallHershey and all the Fluke people.
-
@JaredBusch said:
@DustinB3403 said:
For a SMB (180 Employees) not heavily focused on troubleshooting our network (mostly because it's a one off issue) what tools would you recommend?
I looked over their stuff at SpiceWorld and asked them to host the St Louis SpiceCorp last fall. The LinkSprinter is awesome for the simple tasks like that.
Yup, we have a couple of those, and they are great. Very handy little tools!
-
Thanks for all the Fluke folks coming out to answer questions for us!
-
OP edited take a look!
-
Now we need a few questions for them to answer here guys.
-
Do I recall correctly that the LinkSprinter saves all the data to the cloud? Is there an interface on the device to tell you current status?
-
@Dashrender It does report all network test data to the free online results management platform, Link-Live. For the Model 200 and 300, there is a mobile interface through the built in AP that you can look at real-time test data. Regardless of what model you have, it also automatically send you an email with all of the data that you can reply to to comment in the cloud service.
-
Our LinkSprinter 200 doesn't have any interface that I know of. But I've only used it very basically to check for DHCP, connectivity, etc.
-
@DustinB3403 Check out the LinkSprinter 300. Not only will this help you out to quickly determine general troubleshooting such as, is the problem in the PC or hte Network and if the Network, where. For cable test and identification, it will also give you distance to fault and show open/short/split. Another handy feature is it has flash port, so if you don't know what's connected to what and you have an un-managed switch, you plug the LinkSprinter in at the wall jack and watch the ports, you'll see one light blinking in a different pattern, that's your connection. In a managed switch, will just tell you what switch/slot/port VLAN you are plugged into.
-
@KendallHershey said:
@Dashrender It does report all network test data to the free online results management platform, Link-Live. For the Model 200 and 300, there is a mobile interface through the built in AP that you can look at real-time test data. Regardless of what model you have, it also automatically send you an email with all of the data that you can reply to to comment in the cloud service.
Are the 200 & 300 models able to handle 2.4 and 5gHz wireless bands, or are they only for checking wired connections only?
If wired only, do you guys have any products that would be recommended for checking wireless as well?
-
@art_of_shred It has a built-in mobile AP that you can connect to, pull up a browser once you're connected and go to 172.16.9.9 and run your test you can see all real time data
-
@KendallHershey said:
@DustinB3403 Check out the LinkSprinter 300. Not only will this help you out to quickly determine general troubleshooting such as, is the problem in the PC or hte Network and if the Network, where. For cable test and identification, it will also give you distance to fault and show open/short/split. Another handy feature is it has flash port, so if you don't know what's connected to what and you have an un-managed switch, you plug the LinkSprinter in at the wall jack and watch the ports, you'll see one light blinking in a different pattern, that's your connection. In a managed switch, will just tell you what switch/slot/port VLAN you are plugged into.
How much does the LinkSprinter 300 cost?
-
-
@KendallHershey Perfect thank you for the answer!.
-
@dafyre It runs on the 2.4 band, but they are for checking wired only, it's just a way to communicate from the Linksprinter to your mobile device.
But we do have a killer wireless troubleshooting tool called AirCheck that can tell you all kinds of information like signal strength, detecting rogua APs, interference testing (if you have a crazy microwave or something), etc. But that tool is definitely a bit pricier around $2,000.
http://www.flukenetworks.com/enterprise-network/network-testing/AirCheck-Wi-Fi-Tester -
@IRJ It depends on which distributor you go through, but our list price is $415 - the model 300 also adds a basic distance to fault test (TDR) and flash hub port capabilities.
-
@KendallHershey said:
@DustinB3403 Check out the LinkSprinter 300. Not only will this help you out to quickly determine general troubleshooting such as, is the problem in the PC or hte Network and if the Network, where. For cable test and identification, it will also give you distance to fault and show open/short/split. Another handy feature is it has flash port, so if you don't know what's connected to what and you have an un-managed switch, you plug the LinkSprinter in at the wall jack and watch the ports, you'll see one light blinking in a different pattern, that's your connection. In a managed switch, will just tell you what switch/slot/port VLAN you are plugged into.
That's handy!
