USB as a Main Storage device
-
The server is still a PC. The format would be the same. It's a PC server. There are reports of boot issues with that server. Have we tried updating the firmware yet?
-
@Mike-Ralston said:
@scottalanmiller Correct. Shall I try a different USB stick for the heck of it? I have USB set to boot device #1, so it isn't that... Is there something else I'm missing in BIOS? Did I format the USB wrong for the server, but it still works on a PC?
It worked before.. so what changed?
-
@Dashrender said:
@Mike-Ralston said:
@scottalanmiller Correct. Shall I try a different USB stick for the heck of it? I have USB set to boot device #1, so it isn't that... Is there something else I'm missing in BIOS? Did I format the USB wrong for the server, but it still works on a PC?
It worked before.. so what changed?
I set up a Raid Array.
-
@scottalanmiller said:
The server is still a PC. The format would be the same. It's a PC server. There are reports of boot issues with that server. Have we tried updating the firmware yet?
No, I haven't. How would I go about doing that the CORRECT way? (Done it before but it was via a USB).
-
@Mike-Ralston said:
No, I haven't. How would I go about doing that the CORRECT way? (Done it before but it was via a USB).
USB is the correct way. Only way we have given that we don't have an OS installed and no floppy or DVD drive. Dell should have a download of the latest firmware for that system on their site with instructions.
-
@scottalanmiller Alright, I'll do that right now.
-
Cool, that often solves these kinds of problems.
-
@scottalanmiller said:
Cool, that often solves these kinds of problems.
So how does updating the BIOS work? The file I got was a .exe extension, but I assume that's not an issue... But I don't see any options for installing it.
-
Sometimes there is an ISO to make a CD from, use the Windows 7 to USB utility to see if you can make a bootable USB drive from the ISO (warning it might not work, some ISOs are different format).
-
@Mike-Ralston said:
@scottalanmiller said:
Cool, that often solves these kinds of problems.
So how does updating the BIOS work? The file I got was a .exe extension, but I assume that's not an issue... But I don't see any options for installing it.
.exe is a Windows file. Windows only. It cannot be used elsewhere.
-
From what I remember some of those BIOS upgrades need to be run from a DOS bootable USB drive. You might be able to use something like BartPE to do it.
-
Here are the instructions from the Dell BIOS Download page:
File Format:Non-Packaged
File Name:PER510-011200C.exe
Download Type:HTTP
File Size: 1MB
Format DescriptionThis file format consists of a BIOS-executable file. To use it, download the file and copy it to a DOS-bootable USB flash drive, then boot the system to the USB flash drive and run the program. -
@scottalanmiller It gave me a different file. I'll attempt to find the other one.
-
@scottalanmiller Still got a different one than you mentioned. Tried unpacking files and changing paths and a few little tricks, and nothing is working. Ideas?
-
What one did you get? I took the directions right off of the download page.
-
@scottalanmiller They only had two downloads, I did them both, twice each.
-
Okay, what is the link to the page that you are using?
-
-
Emailing you one to try from that page. See if it matches either than you have.
-
Sent
