FANVIL Deskphone setting for dialing

JasGot

@JaredBusch said in FANVIL Deskphone setting for dialing:

It falls under the <call> heading.

This will be good when we go from playing to production with these phones.

Dashrender

@JasGot said in FANVIL Deskphone setting for dialing:

And Order does matter. In this rule set, if rule 4 comes before rule 2, it complains about conflicting rules.

It's likely not required, but I would change rule 4 to "9[2-8]xxxxxxxxx" then it's very obvious to anyone looking at your system that your intent is to allow for a 9 before the ten digit number is dialed.

You should also change #3 to "1[2-8]xxxxxxxxx"

and I would add
"91[2-8]xxxxxxxxx"

Do your inhouse rules require dialing a 9 before getting an outside line? or is that only there for users of a previous system?

JaredBusch

@JasGot said in FANVIL Deskphone setting for dialing:

@JaredBusch said in FANVIL Deskphone setting for dialing:

It falls under the <call> heading.

This will be good when we go from playing to production with these phones.

Use XML. You can at least validate that the syntax is valid.
Never set everything. Only set what you are changing from default.
1. Assuming your users will be unable to change their phone themselves.

JaredBusch

JaredBusch

Here is the full config for my test phone (X4U).

<?xml version="1.0" encoding="UTF-8"?>
<sysConf>
    <Version>2.0000000000</Version>
    <sip>
        <line index="1">
            <PhoneNumber>119</PhoneNumber>
            <RegisterAddr>pbx.bundystl.com</RegisterAddr>
            <RegisterPort>5061</RegisterPort>
            <RegisterUser>119</RegisterUser>
            <RegisterPswd>b...............................................3</RegisterPswd>
            <EnableReg>1</EnableReg>
            <MediaCrypto>2</MediaCrypto>
            <Transport>3</Transport>
            <VoiceCodecMap>G722,OPUS,PCMU</VoiceCodecMap>
        </line>
    </sip>
    <phone>
        <powerLed>
            <Power>0</Power>
            <MWIOrSMS>3</MWIOrSMS>
            <InUsing>0</InUsing>
            <Ring>2</Ring>
            <Hold>0</Hold>
            <Mute>0</Mute>
            <MissedCall>0</MissedCall>
        </powerLed>
        <date>
            <EnableSNTP>1</EnableSNTP>
            <SNTPServer>0.pool.ntp.org</SNTPServer>
            <SecondSNTPServer>time.nist.gov</SecondSNTPServer>
            <TimeZone>-24</TimeZone>
            <TimeZoneName>UTC-6</TimeZoneName>
            <SNTPTimeout>60</SNTPTimeout>
            <DSTType>1</DSTType>
            <DSTLocation>4</DSTLocation>
            <DSTRuleMode>0</DSTRuleMode>
            <DSTMinOffset>60</DSTMinOffset>
            <DSTStartMon>3</DSTStartMon>
            <DSTStartWeek>5</DSTStartWeek>
            <DSTStartWday>0</DSTStartWday>
            <DSTStartHour>2</DSTStartHour>
            <DSTEndMon>10</DSTEndMon>
            <DSTEndWeek>5</DSTEndWeek>
            <DSTEndWday>0</DSTEndWday>
            <DSTEndHour>2</DSTEndHour>
        </date>
        <timeDisplay>
            <EnableTimeDisplay>0</EnableTimeDisplay>
            <TimeDisplayStyle>1</TimeDisplayStyle>
            <DateDisplayStyle>3</DateDisplayStyle>
            <DateSeparator>0</DateSeparator>
        </timeDisplay>
    </phone>
    <dsskey>
        <SelectDsskeyAction>0</SelectDsskeyAction>
        <MemoryKeytoBXfer>1</MemoryKeytoBXfer>
        <DSSHomePage>1</DSSHomePage>
        <SidekeyConfig1 index="1">
            <Type>2</Type>
            <Value>SIP1</Value>
            <Title>Line</Title>
            <ICON>Green</ICON>
        </SidekeyConfig1>
        <SidekeyConfig1 index="2">
            <Type>2</Type>
            <Value>SIP1</Value>
            <Title>Line</Title>
            <ICON>Green</ICON>
        </SidekeyConfig1>
        <SidekeyConfig1 index="3">
            <Type>1</Type>
            <Value>721@1</Value>
            <Title>Park 1</Title>
            <ICON>Green</ICON>
        </SidekeyConfig1>
        <internal index="1">
            <Fkey index="1">
                <Type>1</Type>
                <Value>118@1/bb</Value>
                <Title>Test 2</Title>
                <ICON>Green</ICON>
            </Fkey>
            <Fkey index="2">
                <Type>1</Type>
                <Value>103@1/bb</Value>
                <Title>Jared</Title>
                <ICON>Red</ICON>
            </Fkey>
        </internal>
    </dsskey>
    <call>
        <port index="1">
            <EnablePreDial>0</EnablePreDial>
        </port>
        <dialplan index="1">
            <Number>933</Number>
            <ApplyToCall>0</ApplyToCall>
            <MatchToSend>1</MatchToSend>
            <Media>0</Media>
            <Line>-1</Line>
            <Address></Address>
            <Port>0</Port>
            <Alias></Alias>
            <DelLen>0</DelLen>
            <Suffix></Suffix>
        </dialplan>
        <dialplan index="2">
            <Number>1xx</Number>
            <ApplyToCall>0</ApplyToCall>
            <MatchToSend>1</MatchToSend>
            <Media>0</Media>
            <Line>-1</Line>
            <Address></Address>
            <Port>0</Port>
            <Alias></Alias>
            <DelLen>0</DelLen>
            <Suffix></Suffix>
        </dialplan>
    </call>
</sysConf>

I haven't put firmware update in it yet or anything.

JasGot

@Dashrender Those rules are not my real rules. I was playing with them to test importing.
Rule 4 is so we can dial 10 digits to area code 989 without creating a 911 issue before the 911 rule was created.
Rules 1 was 2-9, but I change it to see it I could import modified rules.

I need to get my rules straight and repost for you to look at.

Dashrender

I've found overlapping issues with my posted rules...

I can't dial any area code that starts with 2 or 3, as that will pull the call to an extension (i.e. 1-213 goes to ext 1213)

JaredBusch

@Dashrender said in FANVIL Deskphone setting for dialing:

I've found overlapping issues with my posted rules...

I can't dial any area code that starts with 2 or 3, as that will pull the call to an extension (i.e. 1-213 goes to ext 1213)

This is a typical scenario to be aware of and design for. Nothing more than attention to detail.

Dashrender

@JaredBusch said in FANVIL Deskphone setting for dialing:

@Dashrender said in FANVIL Deskphone setting for dialing:

I've found overlapping issues with my posted rules...

I can't dial any area code that starts with 2 or 3, as that will pull the call to an extension (i.e. 1-213 goes to ext 1213)

This is a typical scenario to be aware of and design for. Nothing more than attention to detail.

Yeah - and I wonder if that's one of the leading reasons for adding a 9 for dialing out?

JaredBusch

@Dashrender said in FANVIL Deskphone setting for dialing:

@JaredBusch said in FANVIL Deskphone setting for dialing:

@Dashrender said in FANVIL Deskphone setting for dialing:

I've found overlapping issues with my posted rules...

I can't dial any area code that starts with 2 or 3, as that will pull the call to an extension (i.e. 1-213 goes to ext 1213)

This is a typical scenario to be aware of and design for. Nothing more than attention to detail.

Yeah - and I wonder if that's one of the leading reasons for adding a 9 for dialing out?

no.

Unsolved FANVIL Deskphone setting for dialing