Ubiquiti released EdgeOS 1.9.7
-
@jaredbusch said in Ubiquiti released EdgeOS 1.9.7:
@francesco-provino said in Ubiquiti released EdgeOS 1.9.7:
@jaredbusch said in Ubiquiti released EdgeOS 1.9.7:
They have finally added UNMS.
New features
- [UNMS] Add UNMS support (Ubiquiti Network Management System)
- UNMS forum - https://community.ubnt.com/t5/UNMS-Ubiquiti-Network-Management/bd-p/UNMSBeta
- UNMS introduction and roadmap - https://unms.ubnt.com/
- UNMS demo - https://unms-demo.ubnt.com/
Updated! How to access the UNMS now? Too lazy to look up
You have to setup your own UNMS system and point your devices to it.
Installing… docker is downloading… thanks!
- [UNMS] Add UNMS support (Ubiquiti Network Management System)
-
@dashrender said in Ubiquiti released EdgeOS 1.9.7:
@jaredbusch said in Ubiquiti released EdgeOS 1.9.7:
@dashrender said in Ubiquiti released EdgeOS 1.9.7:
@jaredbusch said in Ubiquiti released EdgeOS 1.9.7:
@donaldlandru said in Ubiquiti released EdgeOS 1.9.7:
@jaredbusch said in Ubiquiti released EdgeOS 1.9.7:
This means it is time for me to get off my ass and setup UNMS
Not much to see in here yet; however, it was pretty simple to get it going. Maybe I should write the how-to
I am looking at the guides now and I already want to over complicate it because I want it behind my own Nginx proxy.
But I think I will skip that and just install it their way for now.
Why? because you don't want to spend $2.50/m on a vultr instance?
Because specs say 2GB RAM minimum recommended. That is not a $2.50 instance.
Also, I do have a ton of space in colo that is perfectly viable to be used for this.
I can use non standard ports and have no issues. But I don't want to do that either.
Holy crap, batman!
I have no idea what those specs are based on supporting. I am sure a handful of devices do not need a ton, but you are installing a docker image as part of this process.
-
@jaredbusch said in Ubiquiti released EdgeOS 1.9.7:
@dashrender said in Ubiquiti released EdgeOS 1.9.7:
@jaredbusch said in Ubiquiti released EdgeOS 1.9.7:
@donaldlandru said in Ubiquiti released EdgeOS 1.9.7:
@jaredbusch said in Ubiquiti released EdgeOS 1.9.7:
This means it is time for me to get off my ass and setup UNMS
Not much to see in here yet; however, it was pretty simple to get it going. Maybe I should write the how-to
I am looking at the guides now and I already want to over complicate it because I want it behind my own Nginx proxy.
But I think I will skip that and just install it their way for now.
Why? because you don't want to spend $2.50/m on a vultr instance?
Because specs say 2GB RAM minimum recommended. That is not a $2.50 instance.
Also, I do have a ton of space in colo that is perfectly viable to be used for this.
I can use non standard ports and have no issues. But I don't want to do that either.
I'm installing it inside an LXD container which in turns is inside a XS VM.
It should works. -
My test is running on a $5 instance, no swap, and seems to be doing ok with one device.
-
ok UNMS installed fairly painless.
-
Be nice if UNMS did unifi aswell for a overall one plane of glass overview.
-
Guess it was time both of an update and a reboot.
Now running 1.9.7
-
@gjacobse said in Ubiquiti released EdgeOS 1.9.7:
Guess it was time both of an update and a reboot.
Now running 1.9.7
Would it be able to setup a cron job so that it could be rebooted every so often?
-
@nerdydad said in Ubiquiti released EdgeOS 1.9.7:
@gjacobse said in Ubiquiti released EdgeOS 1.9.7:
Guess it was time both of an update and a reboot.
Now running 1.9.7
Would it be able to setup a cron job so that it could be rebooted every so often?
Very very likely - I don't know anything about cron jobs... but I would say that it would work the same.
-
@gjacobse said in Ubiquiti released EdgeOS 1.9.7:
Guess it was time both of an update and a reboot.
Now running 1.9.7
Man, I should have grabbed a copy of my colo router uptime, 334 days before the update.
-
@donaldlandru said in Ubiquiti released EdgeOS 1.9.7:
@gjacobse said in Ubiquiti released EdgeOS 1.9.7:
Guess it was time both of an update and a reboot.
Now running 1.9.7
Man, I should have grabbed a copy of my colo router uptime, 334 days before the update.
Reboot to make sure it boots!
-
@dustinb3403 said in Ubiquiti released EdgeOS 1.9.7:
@donaldlandru said in Ubiquiti released EdgeOS 1.9.7:
@gjacobse said in Ubiquiti released EdgeOS 1.9.7:
Guess it was time both of an update and a reboot.
Now running 1.9.7
Man, I should have grabbed a copy of my colo router uptime, 334 days before the update.
Reboot to make sure it boots!
Yes, this! Luckily I have a stack of these things in case it didn't boot.
-
@donaldlandru said in Ubiquiti released EdgeOS 1.9.7:
@dustinb3403 said in Ubiquiti released EdgeOS 1.9.7:
@donaldlandru said in Ubiquiti released EdgeOS 1.9.7:
@gjacobse said in Ubiquiti released EdgeOS 1.9.7:
Guess it was time both of an update and a reboot.
Now running 1.9.7
Man, I should have grabbed a copy of my colo router uptime, 334 days before the update.
Reboot to make sure it boots!
Yes, this! Luckily I have a stack of these things in case it didn't boot.
Except my colo is 400 miles away.
So I have two routers there. The colo staff will move Ethernet if needed.
-
Just got my EdgeRouter for home hooked up after years of it disconnected.
-
@scottalanmiller I've been using my Unifi USG at home, but I think I may put it at my parents house and switch back to my EdgeRouter.
-
@scottalanmiller said in Ubiquiti released EdgeOS 1.9.7:
Just got my EdgeRouter for home hooked up after years of it disconnected.
Time for a firmware update!
-
@scottalanmiller said in Ubiquiti released EdgeOS 1.9.7:
Just got my EdgeRouter for home hooked up after years of it disconnected.
Welcome back to the world of Internet.....
-
@gjacobse said in Ubiquiti released EdgeOS 1.9.7:
@scottalanmiller said in Ubiquiti released EdgeOS 1.9.7:
Just got my EdgeRouter for home hooked up after years of it disconnected.
Welcome back to the world of Internet.....
And to good Internet equipment, as well!
