Thanks for the suggestions everyone.
Got a few better options than when I started 😁

What are you doing that LANCACHE is useful for? Do you install the same games to several computers inside your house?

@DustinB3403

Ha! That's the thing though, I am curious if sudo will be (at least partially derived) from the sudo we know and love, or will it be Microsoft's own thing that happens to use a command named sudo.

@gjacobse You should consider publishing this and others (sanitizing of course) to GitLab or GitHub. It can serve as a reference for you as well as a bit of a portfolio. I know for a fact my GitLab stuff had a positive effect with helping me land my current gig.

@JasGot Thanks everyone. This was very helpful. And that other discussion was too.

After further discussion with them, they are only trying to protect the routing and account number for accounts. The same routing and account number that is printed on their check and sent through us mail.

They agreed, this level of secure transmission is not required.

Thanks.....

@syko24 said in Move FSMO Roles Using PowerShell | Active Directory Domain Controller AD DC:

I'm a fan of the one liner assuming you are transferring all roles to the same DC.

Move-ADDirectoryServerOperationMasterRole -Identity "DC-Server" -OperationMasterRole 0,1,2,3,4 0: PDCEmulator 1: RIDMaster 2: InfrastructureMaster 3: SchemaMaster 4: DomainNamingMaster

Me too. This is what I normally use. SOOOO helpful.

Not sure why powershell made it so complicated to find who has the roles.
netdom query fsmo was so easy.

Finally got this working, reporting my issues here incase someone with similar issues stumbles upon this thread.

The T54W phones would not download the xml files by https (may be because I do not have a valid certificate setup). I could via the xml files in browser on https but phones would wait awhile and fail.
I am doing auto provisioning via http, but my default admin port was set to 8080. I could not download xml files via http with admin port on 8080.
Once I changed the admin port back to default 80, I was able to download xml files via http.
Phones can now download the php/xml files via http.
I changed permissions for the php files back to rw/rw/r with owner asterisk:asterisk

Auto Provisioning was another headache. Eventually I found out that I had the config settings wrong, was using features.remote_phonebook.data.1.url instead of the correct remote_phonebook.data.1.url

My working basefile edits (using EPM):

directory_setting.remote_phone_book.enable = 1 remote_phonebook.data.1.name = Internal remote_phonebook.data.1.url = http://<pbx-ip>/ylab.php features.remote_phonebook.enable = 1 remote_phonebook.data.2.name = External remote_phonebook.data.2.url = http://<pbx-ip>/cm_to_yl_ab.php

With directory_setting.remote_phone_book.enable = 1
You do not need the favorite_settings.xml to enable the remote directory. But it will put local directory as the first option and remote phonebook as the second option after hitting the directory key.

I have added this code to change the order:

directory_setting.local_directory.priority = 2 directory_setting.remote_phone_book.priority = 1

Or to get rid of the local directory

directory_setting.local_directory.enable = 0

Yealink has a Config Parameter Excel file that has all the config parameters and reading it is what lead me to find my mistake.

Thank you so much for considering giving HelpWire a try! We truly appreciate your interest. I'm here not to spam, but to address your concerns directly.

Concerning the "too good to be true" perception, I understand that this often stems from privacy concerns related to using a free (and new) product. So, what's the catch, you might wonder?

Initially, we launched HelpWire as a free service to establish a foothold in a market where competitors offer a broader range of features. That's the entire story.

I assure you, we do not sell any private information to third parties to cover our expenses. Instead, HelpWire is supported by our parent company, Electronic Team, Inc., which has a range of successful products generating revenue to support HelpWire's post-launch phase.

Will there be a paid tier in the future? Yes, but that's still a long way off. Even then, HelpWire will continue to offer a comprehensive set of features for free. Currently, every feature and functionality is available for extensive use, free of any limitations.

I hope this clears up any concerns! If you have more questions or need further clarification, feel free to post them here (I'll keep an eye on this thread) or contact our support team at support(at)electronic(dot)us.

https://www.namesilo.com/hosting#plans

Check for driver updates, ensure that your Radeon graphics card has the latest drivers installed. You can download the latest drivers from the manufacturer's website or use an automated driver updater tool.

@NetworkNerd

1. Identify the Cause of High Disk IO and CPU Wait MariaDB Activity: Since mariadb is showing high IO during the problematic window, it's crucial to identify the queries causing this load. You can enable the slow query log in MariaDB to capture queries that are taking an unusually long time to execute. Scheduled Tasks: Check for any scheduled tasks (cron jobs) on the server that run around 5 AM CST. These could be system tasks, WordPress cron jobs, or database maintenance tasks. 2. Systemd-journald Failure The failure of systemd-journal-flush.service suggests that the journaling system is overwhelmed, likely due to the high IO load. Investigate the journal logs (journalctl) for any errors or warnings that occur around this time. 3. Review WordPress Plugins and Activities Plugin Behavior: Even though plugins like Updraft Plus are scheduled for different times, they might be triggering background tasks. Verify plugin behavior and logs. WordPress Cron: WordPress has its own cron system (wp-cron.php) that can sometimes trigger resource-intensive tasks. Review the WordPress cron events. 4. Server and Database Optimization Database Optimization: Run a check and optimization task on your MariaDB database. Over time, databases can become inefficient and slow. Upgrade Resources: An e2-micro instance is quite limited in resources. If this issue is related to resource constraints, consider upgrading the VM instance type. 5. Monitoring and Logs Enable Enhanced Monitoring: Tools like sar, iotop, or atop can provide in-depth system metrics. Make sure they are configured correctly. Access and Error Logs: Review NGINX, PHP-FPM, and MariaDB logs for any anomalies during the problematic time frame. 6. External Factors Traffic Spikes: Although Jetpack stats show low traffic, consider checking the access logs for unexpected traffic spikes, which might be bots or crawlers. Network Analysis: Use tools to monitor network activity. Unexpected external connections might be contributing to the load. 7. Testing and Isolation Isolate Components: Temporarily disable certain components or plugins during the problem window to see if the issue persists. Test in a Staging Environment: If possible, replicate the setup in a staging environment to test without affecting the live site.

@scottalanmiller said in TMUX: hype or function:

@stacksofplates said in TMUX: hype or function:

Once really nice thing about tmux is you can keep jobs running in the session after disconnecting from SSH

Which means, for those who miss the implication, that you can reconnect to the same session from a different location.

Yeah. You can even share the socket so that multiple people can view a single session. Good for pairing with others.

Which is how things like tmate operate

https://tmate.io/

@eaglex said in FreePBX Contact Manager to Yealink Address Book:

Hello,

First of all, let me thank you for your wonderful work. This made our lives much easier...

If you don't mind, I would like some help: I'm running this script on 2 FreePBX machines, both are practically the same. On one machine, I have no problems viewing contacts with more than one number (In both the XML file and on the phone itself).
However, on the other machine, I can only see on phone number for each contact, even if they have more than one phone number, again, it happens both when I visit the XML file directly from a browser and on the phones.
I can't think of any difference between both the pbx's.

I'd appreciate your help and I'll be happy to provide additional details, logs, info, etc..

Thanks a lot!

My fingers are still crossed for a solution 😞

Thanks!

I'll add another note for future reference here.

For Fedora 39 Server, apcupsd has another package apcupsd-cgi that can be used with a web server to display UPS status. However, you have to move the files it installs by default because they're not in the /var/www/cgi-bin directory.

sudo dnf install -y apcupsd apcupsd-cgi httpd
sudo mv /var/www/apcupsd /var/www/cgi-bin/
sudo chown apache:apache /var/www/cgi-bin/apcupsd/*
sudo systemctl enable --now httpd

Should get it up and running.
I found 3 useful tools with it.
http://YOURIP/cgi-bin/apcupsd/uspstats.cgi
http://YOURIP/cgi-bin/apcupsd/multimon.cgi
http://YOURIP/cgi-bin/apcupsd/upsfstats.cgi

1027bdf5-650f-443d-a898-10669ff70e16-image.png

@RojoLoco said in Cloud Based Auto-Attendant:

@Danp said in Cloud Based Auto-Attendant:

@DustinB3403 I used RC in the past, and it should be able to handle this without issue. You should only need to pay for a single user for this to work.

We currently use RC. Honestly, as much as I want to bag on it, I can't. It works, all the time. The only thing I ever have to touch on RC is add/remove users.

If you are only doing a single line or two, RC is basically unbeatable. Get beyond that, they start getting pretty pricey.

@scottalanmiller said in ChromeOS vs Linux:

@gjacobse said in ChromeOS vs Linux:

Have I managed to mislead myself in believing that the two - while different - are in a basic manner, the same

Basically, yes. In essence, the kernel provides basic compatibility and underlying behaviour (task switching, memory resource management) allowing you to gauge performance, security and application compatibility (that is for binaries.)

But NOTHING that people think of as a system is its kernel. If you put the GNU utils on top of Windows, literally no one can tell. Is it Linux? Nope, it's Windows!

Test this with the Ubuntu for Windows in the Windows 11 Store. It'll install Ubuntu for you to run on your Windows workstation. It will look and feel exactly like Ubuntu you are used to. It IS Ubuntu. What it is not, is Linux, at all. It's 100% Windows, just with the Ubuntu user interface on top, rather than the Windows Desktop interface.

There's no Linux, whatsoever. The Linux Subsystem for Windows is an API compatibility layer NOT an implementation of Linux.

You're thinking of WSL 1. If you follow your instructions that should be WSL 2, which does use the Linux kernel