I have this problem with the Dlink DVX-8000 IPPBX
-
I've worked with replacing these before.
First, find it on your network. I like AngryIP Scanner, but everyone has a favourite tool. Do an IP scan and see if something is at 192.168.100.100 and see if the DLink shows up somewhere else.
-
Use a Crossover cable and directly connect to this unit from this unit, and your laptop.
-
@sadiq said in I have this problem with the Dlink DVX-8000 IPPBX:
Yes. It is a brand new unit. Am using the same IP config in my laptop. Also I have tried another 2 laptops to confirm. The same prob am facing.
Send it back, these are terrible units that should never exist. It's not as good as the free system it is built on. I mean this 100%, rip it out and replace it. These should only exist where you've taken over an old install that already has it, and should immediately be preparing for replacement. No matter what it cost, that's sunk cost. Sell it, send it back, whatever.
-
I am also using the angry IP scanner. No IP device found. The default IP mentioned in the DVX 8000 PDF is 192.168.100.100. So am trying this.
-
@scottalanmiller said in I have this problem with the Dlink DVX-8000 IPPBX:
@sadiq said in I have this problem with the Dlink DVX-8000 IPPBX:
Yes. It is a brand new unit. Am using the same IP config in my laptop. Also I have tried another 2 laptops to confirm. The same prob am facing.
Send it back, these are terrible units that should never exist. It's not as good as the free system it is built on. I mean this 100%, rip it out and replace it. These should only exist where you've taken over an old install that already has it, and should immediately be preparing for replacement. No matter what it cost, that's sunk cost. Sell it, send it back, whatever.
While this is likely the best option, we can't assume everyone we encounter has the authority to make this decision.
-
@sadiq said in I have this problem with the Dlink DVX-8000 IPPBX:
I am also using the angry IP scanner. No IP device found. The default IP mentioned in the DVX 8000 PDF is 192.168.100.100. So am trying this.
That has to also be in your network range for the IP scanner to find it.
-
@sadiq said in I have this problem with the Dlink DVX-8000 IPPBX:
I am also using the angry IP scanner. No IP device found. The default IP mentioned in the DVX 8000 PDF is 192.168.100.100. So am trying this.
Use or make a cross over cable and plug directly into this machine from your laptop.
-
@DustinB3403 said in I have this problem with the Dlink DVX-8000 IPPBX:
@sadiq said in I have this problem with the Dlink DVX-8000 IPPBX:
I am also using the angry IP scanner. No IP device found. The default IP mentioned in the DVX 8000 PDF is 192.168.100.100. So am trying this.
Use or make a cross over cable and plug directly into this machine from your laptop.
No need, but the laptop has to be on the 192.168.100.0/24 network.
-
am using cross cable
OW O GW B BW G MW M - this is the cable type am using. -
Any one suggest any IP scanner that can find any IP
-
@sadiq said in I have this problem with the Dlink DVX-8000 IPPBX:
Any one suggest any IP scanner that can find any IP
You need to set your laptop to use the same scope that this device is configured with.
What operating system is your laptop installed with, something in the Windows 10 family?
-
The laptop IP setting is same match for the 192.168.100.3
-
Win 7 am using
-
@sadiq said in I have this problem with the Dlink DVX-8000 IPPBX:
The laptop IP setting is same match for the 192.168.100.3
OK so open up a command prompt and attempt to ping the device at 192.168.100.100
If it doesn't respond either ICMP is disabled or it isn't using that address.
-
@sadiq said in I have this problem with the Dlink DVX-8000 IPPBX:
Any one suggest any IP scanner that can find any IP
AngryIP. It's free and works really well.
-
it is not pinging
-
@sadiq said in I have this problem with the Dlink DVX-8000 IPPBX:
it is not pinging
The device may not be working. These are not very reliable pieces of hardware.
-
@scottalanmiller Angry IP range i gave 192.168.100.1 192.168.100.255
No IP find
-
@sadiq said in I have this problem with the Dlink DVX-8000 IPPBX:
@scottalanmiller Angry IP range i gave 192.168.100.1 192.168.100.255
No IP find
You have both connected to the switch still, right? With cables that you know work otherwise?
-
Even I try to use Putty - ssl - to open the 192.168.100.100 - It is not going inside
